Search
Close this search box.

FAQ

Our product has up to 65% solids, incorporates military spec additives, contains nano particle technology – advanced UV protection, PTFE to help prevent surface erosion, citronella (a natural mosquito repellent), contains chewstop, and is a penetrating oil based sealer.

To clean, first wet wood, then use Rymar Rinseable soap following the directions on the box. Rinse, let dry 24-48 hours, then seal. Do not use bleach or bleach related products to clean between coats. Bleach will damage coatings.

On new wood approximate coverage 200-400 square feet with semi-transparent. If your wood is very dry and weathered, 1 gallon will cover approximately 100-200
square feet.

You can use it, but you will have to reseal more often, especially on horizontal surfaces versus the pigmented sealers.

A two coat wet on wet with Xtreme Weather- on vertical surfaces that are extremely dry apply a third coat 6 months to a year later. Horizontal surfaces will need more frequent maintenance and may even benefit from a third coat after a season.

Conditions of application, type of wood, location, exposure being ideal – three to six years. Horizontal surfaces will require more frequent applications.

More questions?

Take a look at our FAQ sheet and see if it has an answer to a question that you may have.

Couldn't find an answer?

Reach us through our Contact Us form and let our experts know what your issue is.